Within Manufacturing & Maintenance you are part of production activities where you maintain high quality standards.
Nedan hittar du alla våra lediga tjänster just nu. Om du hittar något som passar, skicka in en ansökan idag!
Job description:
Supervise and work alongside Maintenance Technicians and the Facilities/Maintenance Lead. Set priorities, assign work, coach employees, verify workmanship and coordinate coverage and training. Address attendance and performance concerns under company procedures.
Troubleshoot and repair industrial electrical systems. Read schematics and diagnose three-phase power, motors, starters, contactors, relays, sensors, variable frequency drives and control circuits. Follow electrical safety, qualification and lockout/tagout procedures and use appropriate diagnostic instruments.
Plan and perform preventive maintenance; maintain work orders, equipment histories and the backlog. Identify root causes and correct recurring failures. Escalate unresolved problems to the Facilities Manager with findings and support needs.
Maintain boilers and steam, compressed air, HVAC, cooling towers, water treatment, ventilation and dust collection. Arrange qualified specialist service when needed and coordinate downtime with Production.
Maintain critical spares, obtain quotations and coordinate contractors, routine purchases and completed work within approved budgets. Verify workmanship and follow through on outstanding maintenance needs.
Conduct daily facilities walkthroughs. Coordinate building and grounds upkeep, drainage, fire protection, emergency lighting, severe-weather preparation and assigned emergency response.
Guide and assist the Facilities Safety Coordinator with weekly inspections, training schedules, records and corrective-action follow-up. Support Safety@Work reporting and safety committee activities.
Enforce procedures for guarding, chemical handling, confined spaces, PPE, housekeeping, combustible dust and contractor safety. Support incident and near-miss investigations, document findings, implement corrective actions and escalate significant hazards or compliance concerns.
Coordinate assigned environmental inspections, waste documentation and permit-related records. Arrange qualified service providers and prepare information for management or specialist review.
You will have:
Education and Experience
Required:
Electrical or maintenance trade training, apprenticeship, military technical experience, or an equivalent combination of education and practical experience.
Desired:
Benefits
Salary Info:
This is a first shift position with a starting rate commensurate with experience, $77,000 to $83,000 Salary
This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee.
As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status.
Job Type: Full-time
Location: on site
No relocation or sponsorship available
Summary of the Job:
The Warehouse Associate plays a critical role in supporting daily operations at the Logistics Center Americas in Fort Wayne, IN. This position is responsible for ensuring the accurate, efficient, and safe handling of inbound and outbound product throughout the facility. The Warehouse Associate contributes to the smooth flow of products by performing essential tasks such as receiving, sorting, staging, storing, loading, and unloading products. The role also supports inventory accuracy, quality control, and continuous improvement initiatives that uphold operational excellence within the logistics center.
The Warehouse Associate plays a critical role in supporting daily operations at the Logistics Center Americas in Fort Wayne, IN. This position is responsible for ensuring the accurate, efficient, and safe handling of inbound and outbound product throughout the facility. The Warehouse Associate contributes to the smooth flow of products by performing essential tasks such as receiving, sorting, staging, storing, loading, and unloading products. The role also supports inventory accuracy, quality control, and continuous improvement initiatives that uphold operational excellence within the logistics center.
Tasks and Responsibilities:
As a Warehouse Associate you will play a vital role in ensuring our customers receive their purchased products on time while meeting our high quality standards. Our Warehouse Associates perform a variety of duties based on their internal team, including but not limited to:
Education and Experience:
Schedule: 9-5pm
What we offer:
As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status.
This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee.
Möchten Sie für unsere Kunden und die Umwelt nachhaltig etwas bewegen?
Dann gestalten Sie die Branche von innen heraus mit.
Wer sind wir
Trelleborg Industrial Solutions (TIS) ist ein weltweit führender Anbieter innovativer polymerbasierter Lösungen für Schlüsselindustrien und kritische Infrastrukturen.
Wir sind einer von drei Geschäftsbereichen innerhalb der Trelleborg-Gruppe und beschäftigen weltweit rund 6.200 Mitarbeiter.
Über die Stelle
Als Customer Service Coordinator (m/w/d) bist du für die Verwaltung von Kundenaufträgen und die Kommunikation mit Kunden verantwortlich und sorgst für zeitnahe Bestätigungen und proaktive Kundenbetreuung. Dazu gehören die Koordination von Prognosen, Lieferungen und Planungen mit internen Teams, die Pflege von Kundenportalen und Sicherheitsbeständen sowie die Unterstützung finanzieller Prozesse wie Gutschriften/Lastschriften und Forderungen. Du bearbeitest Beschwerden, stellst die Einhaltung gesetzlicher Vorschriften (z. B. Exportkontrollen) für Lieferungen sicher und verwaltest Sonderfahrzeuganmeldungen.
Bitte beachte, dass diese Position als befristeter Arbeitsvertrag mit einer Laufzeit von einem Jahr angeboten wird.
Deine Aufgaben
Was du mitbringst
Unser Angebot und Ihre Vorteile
Bewerbungsverfahren
Bist du die Person, die wir suchen?
Bewirb dich jetzt und werde Teil unseres Teams in Velten!
Trelleborg ist ein Arbeitgeber, der Chancengleichheit fördert, und wir sind stolz auf die Vielfalt unserer Mitarbeiter. Wir schätzen die besonderen Erfahrungen und Fachkenntnisse, die Menschen mit unterschiedlichem Hintergrund in unser Unternehmen einbringen. Die Fähigkeit, bahnbrechende Technologien zu entwickeln, ist einer unserer wichtigsten Vorteile, und unsere Mitarbeiter machen dies möglich.
Wir bieten ein motivierendes Umfeld, das Wachstum innerhalb des Unternehmens ermöglicht und gleichzeitig in die Aus- und Weiterbildung unserer Mitarbeiter investiert. Unsere Einrichtung ist eine enge und freundliche Gemeinschaft, in der du deine Ideen mit anderen Kollegen austauschen kannst.
Wir begrüßen Bewerbungen von Menschen aller Nationalitäten, Religionen, Geschlechter, sexuellen Identitäten, unterschiedlichen Alters und mit Behinderungen.
Bei Trelleborg gestalten unsere Mitarbeiter die Industrie von innen heraus (#shapingindustryfromtheinside).
Responsible for daily operational tasks to assist in the manufacturing process. The Molder molds parts with a strong focus on quality. The molder could be in the large mold or small mold area. This position is a versatile that could require an employee to perform various duties throughout the shift as assigned. Tasks can include operating machinery, inspecting product, monitoring automated equipment and more.
Tasks and Responsibilities
Education and Experience
Competencies
Physical Demands
Must be able to lift up to 25 pounds; some work areas require lifting up to 50 pounds.
Personal Protective Equipment:
Safety Shoes, Safety Glasses, Gloves, Hot Gloves as needed.
Work environment: characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
EEO Statement
The final compensation offered to the candidate may be based on geographical location, work experience and/or skill level. Additions to the compensation packing, including but not limited to paid time off, insurance benefits and 401(k) eligibility, will be outlined at the time of the job offer.
Compensation: $17.50/hour
401(k) matching
Dental insurance
Disability insurance
Employee assistance program
Flexible spending accounts
Health insurance
Health savings account
Life insurance
Paid time off
Tuition reimbursement
Vision insurance
As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status.
This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee.
Do you want to make a lasting difference? Start shaping industry from the inside.
About the Job
This is an exciting opportunity to join an innovative manufacturing organisation located in the Northern suburbs of Melbourne. We are seeking an ambitious HSEQ Coordinator to join the team. This position serves as the Management Representative for the site’s Work Health & Safety (WHS) and Environmental Management Systems (EMS). This critical role drives continuous improvement, daily functioning, and robust compliance of the site's Integrated Management Systems (IMS) spanning Health, Safety, Environment, and Quality.
Operating in a manufacturing environment, the position ensures alignment with WorkSafe Victoria frameworks, EPA Victoria legislation, and the Trelleborg Group Corporate Safety Management System, explicitly driving the local implementation of the global Safety @ Work (S@W) programme.
About the Ideal Candidate
1. Manage Systems & Corporate Compliance
2. Support Risk Management & S@W Incident Investigation
3. Drive Safety Culture, Consultation & Training
4. Audit Programs & CAPA Governance
5. Quality Operations
Education and Experience
Application Process
Applications will be taken until December 7th. Candidates whose experience most closely matches the description above will be contacted with next steps. Thank you for considering Trelleborg as your potential future employer!
Don’t delay! We’re hiring.
Do you want to experience new challenges and innovate the future of engineered polymer solutions? Accelerate your career with Trelleborg and start shaping industry from the inside.
Who are we?
Here at Trelleborg Sealing Solutions in Rotherham is proud to manufacture Orkot® bearings and wear rings. Orkot® is the world's leading brand in composite bearing material for wear-resistant bearings under high load. With over 60 years' experience in composite bearings, our Rotherham facility provides a full service, from engineering concept to delivery of bearing solutions for specialist markets such as marine, hydro and tidal power.
About the Job
You will have the freedom to use your technical expertise to improve cycle times, reduce waste, enhance machine utilisation, and solve complex machining challenges. Whether you're selecting tooling, developing fixture solutions, troubleshooting machining issues, or identifying opportunities for process improvements, you'll be recognised as a technical specialist who helps drive operational excellence across the business.
This is an ideal opportunity for someone who enjoys combining hands-on manufacturing knowledge with engineering problem-solving. You'll be encouraged to stay at the forefront of CNC machining technology, contribute ideas for continuous improvement, and help develop best practices that improve productivity, quality, and customer satisfaction.
Working within a collaborative and supportive environment, you'll have the opportunity to build strong relationships across multiple functions while taking ownership of projects and initiatives that directly contribute to business success. If you're passionate about precision engineering, advanced manufacturing technologies, and making a measurable impact, we'd love to hear from you
About the Ideal Candidate.
We're looking for a CNC Engineer who is passionate about precision manufacturing, enjoys solving technical challenges, and takes pride in delivering high-quality results. You'll be someone who can confidently turn engineering designs into efficient machining processes, whilst working collaboratively with colleagues across Engineering, Production, Quality, Planning and Maintenance teams.
You'll be supported by an experienced manufacturing team, modern CNC machining technology, and a collaborative working environment that encourages continuous improvement and professional development. We want to help you build on your existing skills whilst giving you opportunities to contribute ideas that improve quality, productivity, and manufacturing performance.
Essential Requirements:
To be successful in this role, you'll need:
Desirable Skills and Experience
It would be advantageous if you also have:
You'll thrive in this role if you:
Application Process
Define the closing date of role and thereafter the application process. Candidates want to know what happens next. They will want to know when they can expect to hear from you. This helps you set candidate expectations and will increase the likelihood of great talent applying to you.
Call to Action
If you're ready to take the lead in supporting the continued success of a global manufacturing business, we'd love to hear from you.
Please submit your CV and covering letter outlining your suitability for the role to Clare Tucker, HR Business Partner, at [email protected].
Trelleborg is an equal opportunity employer! We celebrate diversity and are committed to creating an inclusive environment for all employees.
Descripción
Responsabilidades
• Reparar y realizar tareas de mantenimiento preventivo y correctivo en el edificio, y equipos según se requiera y se indique.
• Ayudar en el desarmado y diagnóstico de fallas mecánicas y eléctricas.
• Apoyar con el mantenimiento externo contratado según sea necesario (limpieza y del mantenimiento del edificio).
• Ayudar en la instalación de nuevos equipos según se requiera.
• Otras tareas según se asignen.
Requisitos
• Bachillerato en educación media
• Técnico afín a la posición (Electromecánica, Electricidad Industrial, Mantenimiento Industrial, Refrigeración y Aire Acondicionado, Mecánica de Precisión, entre otros)
• 2-3 años de experiencia en HVAC, aire comprimido, generadores eléctricos, subestación, chillers de ventilación, bombeo de agua potable, entre otros.
• Disponibilidad para laborar en TB (L-V: 3:36pm a 10:00pm y sábados de 7:00am a 2:30am) o TC (L-V de 10:00pm a 6:00am)
Descripción:
Encargado de gestionar todos los recursos para cumplir con responsabilidad y ofrece el liderazgo necesario para hacer crecer y desarrollar al personal para que tenga éxito. Atiende los fallos que impidan cumplir con esta responsabilidad e implementa soluciones, dentro de las directrices de la empresa, para asegurar que estos fallos no se repitan. Responsable de mejorar continuamente los procesos y eliminar desperdicios del sistema de producción. Debe poder comunicarse de manera efectiva y trabajar de forma colaborativa con el personal de todos los turnos.
Requisitos:
Responsabilidades:
Are you an experienced Injection Molding Technician who enjoys solving problems, optimizing processes, and working with advanced plastics manufacturing equipment?We're hiring a highly skilled Injection Molder to set up molds, dial in machine parameters, perform quality inspections, and keep production running smoothly.
💰 Competitive Pay: $30-$45/hour
🎯 Excellent Benefits Package
📈 Stable Manufacturing Environment
Apply now and bring your expertise to a team that values quality, safety, and continuous improvement.
Job Description
We are currently seeking a Tool Maker to join our Tooling department (CNC Milling machines).
Duties and Responsibilities
Qualifications / Skills
Do you approach new challenges with passion and take responsibility for your actions? Be the change you want to see and start shaping industry from the inside.
Who are we?
Trelleborg India Private Limited, (Business Unit: Trelleborg Sealing Solutions) headquartered at Bangalore is a leading sealing solution provider in India. The company with about 800+ employees across India has been successful in creating strong footholds in the Sealing market of the country.
We are seeking a skilled CNC Turning Operator to join our Production team. The role is responsible for setting, operating, and monitoring CNC turning machines to manufacture precision sealing components in line with engineering drawings, control plans, and customer specifications.
Key Responsibilities:
CNC Operation & Setup: Operate and set up CNC machines as per technical drawings and production requirements.
Quality Control & Inspection: Inspect finished components to ensure dimensional accuracy and compliance with quality standards.
Process & Production Support: Support production activities, troubleshoot machine issues, and ensure smooth workflow to meet production targets.
Safety & Compliance: Follow workplace safety procedures, machine operating guidelines, and company policies to maintain a safe working environment.
Education & Experience:
Diploma in Mechanical Engineering or related field.
1–3 years of experience in CNC Turning operations, including tool setting, insert selection, and understanding of tool life.
Experience in machining/turning of metal or polymer
Ability to read and interpret engineering drawings, control plans, and work instructions.
Fluent in Kannada and English.
Behavioral Competencies:
Attention to detail and quality orientation.
Ability to work in shifts and with minimal supervision.
Effective communication and team coordination.
Our Benefits for You
#ShapingIndustryfromtheInside#
Trelleborg is an Equal Opportunity Employer, and we take pride in the diversity of our employees, valuing the special experience and expertise that people from different backgrounds bring to our business. The ability to develop ground-breaking technologies is one of our key assets and our people make it happen.
Feel free to contact our HR Team for any questions: [email protected]
Role Summary:
The Supervisor is the front‑line execution leader responsible for daily production performance, operator accountability, flow stability, documentation accuracy, and quality at the source. This role owns total area performance for one production zone and ensures safe, disciplined, and efficient operations every shift.
Key Responsibilities
Daily Production Execution
Owns throughput, WIP control, and flow in assigned area.
Ensure assets are staffed, running producing to plan, hitting production targets.
Maintain a safe work environment.
Direct the workforce in a quality conscious manner and ensure timely scheduling of the work through the areas.
Develop and maintain systems to measure and drive Key Metrics.
Train and direct those employees who support this position.
Direct the activities of shift production.
Ensure proper start up and lock down of facility.
Lead a team environment with high level of energy.
Drive continuous improvement and lean manufacturing practices, working with the CI Manager.
Develop and maintain common sense manufacturing practices in all areas.
Perform activities as directed by Business Unit Managers.
Support supervisors on others shifts and promote a teamwork environment
Monitor and improve production rates throughout the operations, providing feedback to Operations and Business Unit Manager.
Participate in, and continuously improve, the facility’s certification programs (ISO 14001, ISO 45001, AS9100D, etc.) to achieve plant KPIs.
Work OT as required, including weekends as needed.
Competencies
Strong communication and coaching skills.
Ability to enforce standards consistently.
Basic understanding of manufacturing.
Ability to interpret part packets
Strong problem-solving and root-cause capability.
Ability to manage multiple priorities under pressure.
High integrity and professionalism.
Preferred Education and/OR Experience
Two-year degree or five+ years of related manufacturing experience.
Experience working in a union manufacturing environment strongly preferred.
Good leadership and organizational skills with ability to multi-task and prioritize.
Sound knowledge of Lean Manufacturing.
THIS WILL BE A 3RD SHIFT POSITION BUT WILL TRAIN ON 1ST SHIFT.
Applicaton
Last Application Date: 12-15-2026
Please right-click the link to open in a new tab
The Injection Mold Operator is responsible for operating injection molding equipment and performing a variety of manufacturing tasks to support efficient production and timely delivery. This position ensures products are manufactured in accordance with engineering specifications and quality standards through the inspection of molded components, identification of defects, and adherence to established production procedures.
Do you want to experience new challenges and innovate the future of engineered polymer solutions? Accelerate your career with Trelleborg and start shaping industry from the inside.
Job Summary
The Sr. Facilities Engineer is responsible for ensuring reliable operation and maintenance of plant facilities, utilities, and infrastructure. The role focuses on maximizing uptime, ensuring compliance, optimizing resources, and supporting manufacturing operations.
Key Responsibilities
Required Skills and Experience
Preferred Skills
Trelleborg is an equal opportunity employer! We celebrate diversity and are committed to creating an inclusive environment for all employees. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.
“Are you the one we’re looking for? Apply now by clicking the Apply button, or email me for more information”
At Trelleborg our people are #shapingindustryfromtheinside
Are you a talent looking to build business skills, gain experience, and take on exciting challenges? Grow your career with Trelleborg and start shaping the industry from the inside.
Who are we?
Trelleborg Industrial Solutions (TIS) is a global leader in innovative polymer-based solutions for key industries and critical infrastructure. We are one of three Business Areas within the Trelleborg Group, with a total of about 6 200 employees around the world.
Trelleborg Marine & Infrastructure are committed to advancing operational performance in marine, port and built infrastructure, empowering our clients to succeed at the highest level.
Job Summary
The Facilities Engineer is responsible for ensuring reliable operation and maintenance of plant facilities, utilities, and infrastructure. The role focuses on maximizing uptime, ensuring compliance, optimizing resources, and supporting manufacturing operations.
Key Responsibilities
Required Skills and Experience
Preferred Skills
Trelleborg is an equal opportunity employer! We celebrate diversity and are committed to creating an inclusive environment for all employees. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.
“Are you the one we’re looking for? Apply now by clicking the Apply button, or email me for more information”
At Trelleborg our people are #shapingindustryfromtheinside
Are you a talent looking to build business skills, gain experience, and take on exciting challenges? Grow your career with Trelleborg and start shaping the industry from the inside.
Who are we?
Trelleborg Industrial Solutions (TIS) is a global leader in innovative polymer-based solutions for key industries and critical infrastructure. We are one of three Business Areas within the Trelleborg Group, with a total of about 6 200 employees around the world.
Trelleborg Marine & Infrastructure are committed to advancing operational performance in marine, port and built infrastructure, empowering our clients to succeed at the highest level.
Job Summary
The Technical Engineer is responsible for testing rubber raw materials and compounds to ensure compliance with quality standards. The role supports quality assurance through material validation, testing, documentation, and laboratory operations.
Key Responsibilities
Required Skills and Experience
Preferred Skills
Trelleborg is an equal opportunity employer! We celebrate diversity and are committed to creating an inclusive environment for all employees. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.
“Are you the one we’re looking for? Apply now by clicking the Apply button, or email me for more information”
At Trelleborg our people are #shapingindustryfromtheinside
Make your mark on the future. Accelerate your career with Trelleborg and start shaping industry from the inside.
Who are we?
Trelleborg Industrial Solutions (TIS) is a global leader in innovative polymer-based solutions for key industries and critical infrastructure. We are one of three Business Areas within the Trelleborg Group, with a total of about 6 200 employees around the world.
Trelleborg Marine & Infrastructure are committed to advancing operational performance in marine, port and built infrastructure, empowering our clients to succeed at the highest level.
Job Summary
The Project Engineer is responsible for handling customer inquiries, quotations, order processing, and dispatch coordination to ensure timely order fulfilment and customer satisfaction.
Key Responsibilities
Required Skills and Experience
Preferred Skills
Trelleborg is an equal opportunity employer! We celebrate diversity and are committed to creating an inclusive environment for all employees. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.
“Are you the one we’re looking for? Apply now by clicking the Apply button, or email me for more information”
At Trelleborg our people are #shapingindustryfromtheinside
Do you approach new challenges with passion and take responsibility for your actions? Be the change you want to see and start shaping industry from the inside.
Who are we?
Trelleborg India Private Limited, (Business Area: Trelleborg Sealing Solutions) headquartered at Bangalore is a leading sealing solution provider in India. The company with about 900+ employees across India has been successful in creating strong footholds in the Sealing market of the country.
We are seeking a skilled Engineer - Quality Management Systems to join our team. The role is responsible for supporting the maintenance of Quality Management Systems by involving in planning for internal audits, MRM. Participate in internal audits including process audits and Responsible for handling the 5S auditing process and reporting for the entire manufacturing facility.
Key Responsibilities:
Education & Experience:
Behavioral Competencies:
Our Benefits for You
#ShapingIndustryfromtheInside#
Trelleborg is an Equal Opportunity Employer, and we take pride in the diversity of our employees, valuing the special experience and expertise that people from different backgrounds bring to our business. The ability to develop ground-breaking technologies is one of our key assets and our people make it happen.
Feel free to contact our HR Team for any questions:
Ashwini Venkatesh @ ashwini.venkatesh@trelleborg.com
Ready to make a real impact on the manufacturing floor? TSS Denver is seeking a hands-on Manufacturing Engineer to drive process improvements, lead change, and support cutting-edge products for aerospace, medical, semiconductor, and industrial customers. If you thrive on solving complex problems,
Make your mark on the future. Accelerate your career with Trelleborg and start shaping industry from the inside.
Who are we?
Trelleborg Industrial Solutions (TIS) is a global leader in innovative polymer-based solutions for key industries and critical infrastructure. We are one of three Business Areas within the Trelleborg Group, with a total of about 6 200 employees around the world.
Trelleborg Marine & Infrastructure are committed to advancing operational performance in marine, port and built infrastructure, empowering our clients to succeed at the highest level.
The Production Manager will oversee rubber manufacturing operations, ensuring efficient production, quality control, and adherence to safety and compliance standards. This role is responsible for managing production teams, optimizing processes, and meeting output targets in alignment with business goals.
Trelleborg is an equal opportunity employer! We celebrate diversity and are committed to creating an inclusive environment for all employees. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.
“Are you the one we’re looking for? Apply now by clicking the Apply button, or email me for more information”
At Trelleborg our people are #shapingindustryfromtheinside
At Trelleborg every part made allows us to make a difference. Founded in 1905, Trelleborg is an international organization operating within a multitude of industries including aerospace, automotive, medical, industrial, and food, water and beverage. Our manufacturing team is focused on creating parts needed in the aerospace industry.
Summary of the Role:
You would be responsible for setting up and operating a CNC machine. During your workday you would run various parts, perform minor machine maintenance, clean and deburr parts to ensure quality parts.
Tasks and Responsibilities:
Education and Experience:
Application:
The final compensation offered to the candidate may be based on geographical location, work experience and/or skill level. Additions to the compensation packing, including but not limited to paid time off, insurance benefits and 401(k) eligibility, will be outlined at the time of the job offer.
Compensation range: $26.00-30.00/hour
As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status.
This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee.
All applicants must successfully complete a background check and drug screening as a condition of employment.
At Trelleborg every part made allows us to make a difference. Founded in 1905, Trelleborg is an international organization operating within the multitude of industries including aerospace, automotive, medical, industrial, and food, water and beverage. Our manufacturing team is focused on creating parts needed in the aerospace industry.
Summary of the Role:
As an Injection Mold Processor, you will set up and operate injection molding machines to produce high-quality plastic parts. You will monitor production, inspect parts for quality, troubleshoot process issues, perform basic machine maintenance, and help ensure production, quality, and safety standards are met. Working closely with the manufacturing team, you will support efficient operations and continuous improvement efforts.
Tasks and Responsibilities:
Schedule: Monday to Thursday, 5:30am to 4:00pm
Education and Experience:
The final compensation offered to the candidate may be based on geographical location, work experience and/or skill level. Additions to the compensation packing, including but not limited to paid time off, insurance benefits and 401(k) eligibility, will be outlined at the time of the job offer.
Compensation range: $32.00-40.00/hour
As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status.
This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee.
All applicants must successfully complete a background check and drug screening as a condition of employment.
Summary of the Role:
A second shift production supervisor is responsible for overseeing and managing the daily operations of a manufacturing department that specializes in thermoforming and general production operations, utilizing specialized equipment, paint, and finishing processes for aerospace goods. They ensure production targets are met efficiently, products meet quality standards, and safety protocols are followed. Additionally, they often lead and motivate a team of workers, allocate resources, and communicate with higher-level management to optimize production processes.
The final compensation offered to the candidate may be based on geographical location, work experience and/or skill level. Additions to the compensation packing, including but not limited to paid time off, insurance benefits and 401(k) eligibility, will be outlined at the time of the job offer.
Application:
As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status.
This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee.
All applicants must successfully complete a background check and drug screening as a condition of employment.
Machinist operate a computer numerical control (CNC) machine while upholding quality and safety standards; keeping records; and maintaining equipment and supplies.
General Operator works in a Small Business Unit utilizing lean manufacturing practices and is responsible for producing a quality product. Assist in other areas as required securing on-time delivery.
Start your career with Trelleborg Sealing Solutions! Join us as a Manufacturing Support Operator—no experience needed. Learn hands-on skills, grow with a global leader, and be part of an innovative team. Apply today and build your future!
Summary of the Role:
Trelleborg Sealing Solutions is currently looking for a painter to add to our team!
As a painter, you would prepare the surfaces of the parts, mix the paint, prep your tools, and apply paint ensuring high quality, blemish free parts.
Tasks and Responsibilities:
Required Skills:
Education and Experience:
Application:
The final compensation offered to the candidate may be based on geographical location, work experience and/or skill level. Additions to the compensation packing, including but not limited to paid time off, insurance benefits and 401(k) eligibility, will be outlined at the time of the job offer.
Last Application Date 9/20/2026
As an EEO/Affirmative Action employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability.
This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee.
Er du vant til at arbejde med CNC-maskiner, og sætter du pris på kvalitet og præcision i dit arbejde? Så er det måske dig, vi mangler. Trelleborg Sealing Solutions i Helsingør søger CNC-operatører til flere ledige stillinger i produktionen med opstart snarest muligt. Lyder det som noget for dig?
Hvad går stillingen ud på?
Du bliver en del af drejeafdelingen hos Trelleborg Sealing Solutions, som producerer tætningsløsninger i plastmateriale (primært PTFE) til industrien. Afdelingen består af cirka 80 kolleger med stor faglig erfaring, og mange har været hos os i mange år. Vi arbejder i faste skift, har et stærkt sammenhold og sørger for en grundig oplæring, så du bliver fortrolig med både maskiner, processer og kvalitetskrav.
Dine primære opgaver vil indebære:
• Værktøjsopsætning samt tilpasning og justering af CNC-programmer
• Opstilling og betjening af CNC-drejebænke
• Kvalitetskontrol ved brug af manuelt måleudstyr og visionsmaskiner
• Elektronisk registrering og dokumentation af kvalitetstjek
Arbejdstid:
• Daghold: Mandag - torsdag kl. 07:00-15:15, fredag kl. 07:00-13:00
• Aftenhold: Mandag - torsdag kl. 15:10-22:40, fredag kl. 12:55-16:55
• Nathold (4-dages uge): Mandag - torsdag kl. 22:35-07:05
Hvem er du?
Du kan være faglært industritekniker eller ufaglært med relevant teknisk baggrund. Det vigtigste er, at du har teknisk og matematisk forståelse, arbejder med høj præcision og har erfaring med CNC-drejebænke. Hos os får du mulighed for løbende at udvikle dine kompetencer og tage ansvar i takt med, at du bliver fortrolig med opgaverne.
Vi lægger vægt på, at du:
• Har erfaring med betjening og opstilling af CNC-drejebænke
• Har god teknisk forståelse og kendskab til værktøjer og maskiner
• Kan læse og forstå tekniske tegninger samt arbejde med mål, tolerancer og relevante beregninger
• Arbejder kvalitetsbevidst og bidrager positivt til samarbejdet i hverdagen
• Trives med faste skift
• Behersker dansk i skrift og tale
Hvem er vi?
Vi er mere end 300 engagerede kolleger hos Trelleborg Sealing Solutions i Helsingør, og vi er specialiserede i udvikling og produktion af tætningssystemer til højteknologiske virksomheder inden for hydraulik-, bil-, fly-, skibs-, olie- og maskinindustrien. Selvom vi måske ikke er så kendte i den brede befolkning, er vi blandt verdens bedste inden for vores felt, og vi anerkendes af vores kunder for vores produkter og kvalitet. Det opnår vi ved konstant at stille krav til hinanden, til vores leverandører og ikke mindst til vores produkter. Vi er en del af den børsnoterede Trelleborg Group, som har knap 17.000 medarbejdere fordelt over hele verden.
Hvad kan vi tilbyde dig?
Hos Trelleborg Sealing Solutions bliver du en del af en virksomhed, der bidrager til, at biler yder mere, fly lander stabilt, og maskiner fungerer – selv under ekstreme forhold. Derudover kan du se frem til:
• En hverdag med højt humør, godt sammenhold og mange erfarne kolleger
• Erfaring fra en global virksomhed, der er førende i sin branche med anerkendte produkter
• Personale- og idrætsforening, kunstforening, sundhedsforsikring og helbredstjek ved opstart på nathold samt en helt fantastisk kantineordning
• Ansættelse efter Industriens Overenskomst
Lyder det som noget for dig?
Så vil vi glæde os til at modtage din ansøgning og CV senest den 30. november via formularen nedenfor.
Vi holder samtaler løbende og lukker opslaget, når de rette kandidater er fundet. Vent derfor ikke for længe med at søge, hvis du er interesseret.
Har du relevante spørgsmål til stillingen, er du velkommen til at kontakte:
• Produktionsleder Silas Thirunamakkarasu på telefon 31 10 07 57
• Produktionsleder Morten Månsson på telefon 31 71 31 85
Hos Trelleborg Sealing Solutions behandler vi alle lige. Vi værdsætter diversitet og sætter en ære i at skabe et inkluderende miljø for alle medarbejdere. Vi opfordrer alle, uanset køn, alder, nationalitet, religiøs overbevisning, identitet og demografisk baggrund, til at ansøge.
Summary of the Role:
The Operations Manager has responsibility for the sites production operations working closely with Engineering, Quality, Commercial Teams, and customers to deliver high quality parts to our customers. This role oversees department managers to ensure departmental goals are established and achieved, maximizing customer satisfaction while minimizing cost.
Tasks and Responsibilities:
Education and Experience:
Required:
Desired:
Competencies:
Travel:
Application:
Last Application Date 9/27/2026
The final compensation offered to the candidate may be based on geographical location, work experience and/or skill level. Additions to the compensation packing, including but not limited to paid time off, insurance benefits and 401(k) eligibility, will be outlined at the time of the job offer.
Compensation range: $99,000-$148,000
401(k) matching
Dental insurance
Disability insurance
Employee assistance program
Flexible spending account
Health insurance
Health savings account
Life insurance
Paid time off
Tuition reimbursement
Vision insurance
As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status.
This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee.
This role lets you apply real craftsmanship, producing high‑precision tools that directly impact quality and performance. You’ll work on varied, hands‑on projects and play a key part in keeping production agile, reliable, and efficient.
Join a global leader in engineered polymer solutions and bring precision to life. Trelleborg is seeking a skilled CNC Setup Machinist to set up and optimize CNC equipment for high-quality production in a fast-paced, team-oriented environment.
Skilled Manufacturing Moulder at Trelleborg Sealing Solutions
Are you a talented, skilled individual looking to build business skills, gain experience, and take on exciting challenges? Grow your career with Trelleborg and start shaping the industry from the inside.
Who are we?
Trelleborg is a world leader in engineered polymer solutions for almost every industry on the planet. At Trelleborg Sealing Solutions, we are a leading global supplier of sealing solutions. Our engineered polymer solutions seal, damp, and protect aircraft and terminal equipment, and are rigorously tested and used in almost every major aircraft program, including airframes, aircraft engines, flight control systems, and landing gears. We collaborate closely with leading industry brands to enhance their performance, drive their business forward, and shape the industry. Our Cadley Hill facility designs and manufactures seals for the Aerospace market, serving key end users such as Boeing, Airbus, Rolls-Royce, Safran, and more.
Position: Skilled Manufacturing Moulder
Location: Swadlincote DE11 9EU - Cadley Hill site
About the Job:
At our TSS Cadley Hill site, we manufacture hand-built Aircraft, Engine, and Airframe seals using a wide range of silicones, fabrics, and retaining metals. The moulding process involves hand fabricating silicones, fabrics, and metallic items into a part-specific mould tool, which is built to precise manufacturing specifications and loaded into a compression press to cure under pressure and heat, forming the final product.
About You:
We are seeking individuals with a professional mindset and excellent attention to detail. The role requires a high degree of dexterity and enthusiasm to develop craftsmanship skills within the sealing solutions industry.
Education and Experience:
Competencies:
Behavioural Characteristics:
Working Hours:
Benefits:
Responsibilities:
For a more comprehensive understanding of the primary duties and responsibilities associated with this role, please feel free to contact us. We would be happy to provide you with a detailed job description.
Join us in shaping the future of sealing solutions! Apply now to be part of a team and embark on a journey of innovation and impact.
At Trelleborg our people are #shapingindustryfromtheinside
Trelleborg is an equal opportunity employer! We celebrate diversity and are committed to creating an inclusive environment for all employees. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.
Education and Experience:
Physical Requirements for a Manufacturing Associate:
This position requires the ability to lift and carry up to 25 lbs. frequently during the workday. Most of the day is spent in a standing position with frequent bending and/or squatting.
Benefits:
Salary Info:
This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)
As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
This is a first shift position with a starting rate commensurate with experience, the minimum starting wage is $20.00 per hour
Please right click the link to open in a new tab
Har du hænderne skruet rigtigt på og lyst til at lære nyt? Hos Trelleborg Sealing Solutions Helsingør søger vi løbende nye kolleger med teknisk flair og blik for kvalitet – er det dig, vi mangler på holdet?
Vi er ca. 300 engagerede kolleger, og vi er specialiserede i udvikling og produktion af tætningssystemer til højteknologiske virksomheder inden for hydraulik-, bil-, fly-, skibs-, olie- og maskinindustrien. Selvom vi måske ikke er så kendte i den brede befolkning, er vi blandt verdens bedste inden for vores felt, og vi anerkendes af vores kunder for kvaliteten af vores produkter. Det opnår vi ved konstant at stille krav til hinanden, til vores leverandører og ikke mindst til vores produkter. Vi er en del af den børsnoterede Trelleborg Group, som har knap 17.000 medarbejdere fordelt over hele verden.
Uopfordret ansøgning
Vi får løbende ledige stillinger i vores produktionsafdelinger, men vi kan ikke stille nogen garanti for, hvornår. Dette opslag er lavet til uopfordrede ansøgninger, og vi kontakter dig kun, hvis vi har en ledig stilling, som vi tænker, du kunne være en relevant kandidat til. Vi beholder ansøgninger i 6 måneder, hvorefter de automatisk slettes. Ønsker du fortsat at være i vores jobbank efter 6 måneder, skal du indsende din ansøgning igen. Trods det ekstra besvær er vi dermed sikre på, at dem, der er i jobbanken, er aktive og interesserede. Samtidig sikrer vi, at vi overholder den gældende GDPR-lovgivning.
Om vores stillinger i produktionen
Vores produktionsafdelinger arbejder med alt fra blanding af råmaterialer, formning af rør og drejning af tætninger på CNC-maskiner til vask, rens, kvalitetstjek og manuel efterbearbejdning af emner.
Arbejdsopgaver i afdelingerne:
Mould – rørproduktion
I Mould arbejdes der med vores råmaterialer i pulverform. Her blandes råmaterialerne i store spande, hvorefter pulveret, under højt tryk, presses til rør i både større og mindre formpressere. Efter rørene er blevet presset, sendes de til sintring, hvor de færdigproduceres i vores ovne. Arbejdsopgaverne kan inkludere tungere løft. De overordnede arbejdsopgaver i Mould består af:
Drej – drejning af tætninger
I Drej arbejdes der videre med de færdigproducerede rør, som her ved hjælp af CNC-maskiner drejes til vores højteknologiske tætninger. Vi kører alt fra enkeltstyksproduktion med mange omstillinger til højvolumenproduktion, hvorfor der er variation i det, der produceres. De overordnede arbejdsopgaver i Drej består af:
Efterbearbejdning – visuel inspektion, efterbearbejdning og pakning af ordrer
I Efterbearbejdningen foregår den sidste del af produktionsprocessen. Her foregår meget af arbejdet ved manuel og visuel inspektion af tætningerne, men nogle emner kan også have behov for særlig efterbearbejdning i form af vask eller ved, at der laves særlige spor eller huller i tætningerne. Når produkterne er visuelt kontrolleret, skal de pakkes efter ordrernes anvisninger. De overordnede arbejdsopgaver i Efterbearbejdningen består af:
QC – kvalitetssikring af produkter før, under og efter produktion
I Quality Control er kvalitet af højeste prioritet. Her kvalitetssikres vores produkter både før, under og efter produktion, og det er QCs ansvar at sørge for, at vores produkter overholder de kvalitetsstandarder, vi lover vores kunder. QC har en bred kontaktflade, og du skal derfor trives i en udadvendt rolle samt være god til at samarbejde og kommunikere med kolleger på tværs af afdelinger. De overordnede arbejdsopgaver i QC består af:
Vores produktion kører døgnet rundt, og du vil derfor få mulighed for at arbejde i fast skift fra mandag til fredag på enten dag-, aften- eller nathold. Det er dog sjældent, at vi får ledige stillinger på daghold. Uanset hvilket hold du bliver en del af, sørger vi naturligvis for grundig oplæring og løbende udvikling, så du bliver godt klædt på til opgaven.
Hvem er du?
For os er det ikke så vigtigt, hvad du tidligere har arbejdet med, eller hvilken uddannelsesmæssig baggrund du har – vi tror nemlig på, at hvis man har evnerne og den rette indstilling, vilje og gå-på-mod, så kan resten tillæres. Det vil dog være en fordel, hvis du har en faglig relevant uddannelse, eller hvis du har relevant erfaring fra tidligere beskæftigelse.
For at vi fortsat kan bibeholde en verdensklasseproduktion, er det et krav, at du er grundig, kvalitetsbevidst og aldrig går på kompromis med kvaliteten. Du skal også kunne begå dig på dansk i skrift og tale samt have kendskab til IT på brugerniveau. Det er også vigtigt, at du kan arbejde selvstændigt, og at du trives med at arbejde alene.
For os er det vigtigt med et rart, trygt og inspirerende arbejdsklima, hvorfor det også er vigtigt for os, at du tør tage ansvar og initiativ, ser muligheder fremfor begrænsninger og bidrager positivt til fællesskabet med godt humør og gå-på-mod.
Hvad kan vi tilbyde dig?
Hos Trelleborg Sealing Solutions Helsingør bliver du en del af en global og professionel virksomhed, der er førende i sin branche. Vi får biler til at yde mere, fly til at lande stabilt og gravkøer til at bryde igennem det umulige. Du kan se frem til:
Er du interesseret i at blive vores nye kollega?
Så vil vi glæde os meget til at modtage din ansøgning og CV via formularen nedenfor. I ansøgningen bedes du tydeligt anføre, hvilke/n afdeling/er og hvilke/t skift, du er interesseret i at blive en del af.
Hvis du har særlige kvalifikationer, fx svendebreve, erfaring med CNC, erfaring som industritekniker eller maskinarbejder, erfaring med arbejde i plast, erfaring med kvalitetskontrol, erfaring med ensidigt arbejde eller lignende, så husk endelig at skrive det på.
Hos Trelleborg Sealing Solutions behandler vi alle lige. Vi værdsætter diversitet og sætter en ære i at skabe et inkluderende miljø for alle medarbejdere. Vi opfordrer alle, uanset køn, alder, nationalitet, religiøs overbevisning, identitet og demografisk baggrund, til at ansøge.